Motorola G24 Guide Developer's Manual page 136

Call Control
The following table shows the +TCLCC parameters.
<Parameter>
<state>
<idx>
<dir>
<call state>
<mode>
<mpty>
<exitcause>
<number>
<type>
Example
AT+TCLCC=1
OK
AT+TCLCC?
+TCLCC: 1
OK
ATD035659801; // MO Call
OK
+TCLCC: 1,0,1,1,0,,"035659801",1
+TCLCC: 1,0,2,1,0,,"035659801",1
OK
+TCLCC: 1,0,3,1,0,,"035659801",1
AT+CHLD=2
3-52
Table 3-24: +TCLCC Parameters
0 Disable TCLCC unsolicited indication (Default).
1 Enable TCLCC unsolicited indication.
Integer type, call identification number.
0 Mobile originated call (MO)
1 Mobile terminated call (MT).
The state of the call
0 Idle
1 Calling (MO call)
2 Connecting (MO call)
3 Active
4 Hold
5 Waiting (MT call)
6 Alerting (MT call)
7 Busy
Bearer/Teleservice
1 Voice Call
2 Data
3 Fax
9 Unknown
Multiparty status
0 Call is not part of a multiparty call.
1 Call is one of multiparty call parties.
See Table 3-197.
Phone number in the format specified by <type>.
Contains a quoted string of up to 32 characters.
7 bits Phone number display format.
Type of address octet in integer format (refer to GSM 04.08 subclause 10.5.4.7).
AT Commands Reference Manual
Description
December 31, 2007