Cpms, Preferred Message Storage - Motorola G24 Guide Developer's Manual

Example
AT+CSMS=128
+CSMS: 001,001,001
OK
AT+CSMS?
+CSMS: 128,001,001,001
OK
AT+CSMS=?
+CSMS: (128)
OK

+CPMS, Preferred Message Storage

This command handles the selection of the preferred message storage area. The message storage
area is divided into three parts, mem1, mem2 and mem3.
Command
Type
Set
Read
Test
December 31, 2007
Syntax Response/Action
+CPMS=<mem1> +CPMS:
[,<mem2>[,<mem <used1>,<total1>,<used2>,
3>]] <total2>,<used3>,<total3>
OK
or:
+CMS ERROR: <err>
+CPMS? +CPMS:
<mem1>,<used1>,<total1>,
<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3>
OK
or:
+CMS ERROR: <err>
+CPMS=? +CPMS: (list of supported
<mem1>s),(list of
supported <mem2>s),(list
of supported <mem3>s)
OK
+CMS ERROR: <err>
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
The Set command sets the memory
storage.
The Read command displays the selected
memory storage type for the three
memory areas.
The Test command lists the supported
memory storage for <mem1>, <mem2>
and <mem3>.
3-99