Motorola G24 Guide Developer's Manual page 437

The following table shows the +CGEQNEG command parameters.
<cid>
<Traffic class>
<Maximum Bit-rate UL>
<<Maximum Bit-rate DL>
<Guaranteed Bit-rate UL>
<Guaranteed Bit-rate DL>
December 31, 2007
Table 3-226: +CGEQNEG Command Parameters
<Parameter>
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Numeric parameter which specifies a particular PDP
context definition (see +CGDCONT and
+CGDSCONT commands).
Numeric parameter that indicates the type of
application for which the EDGE bearer service is
optimized.
0 - conversational
1 - streaming
2 - interactive
3 - background
4 - subscribed value
If the Traffic class is specified as conversational or
streaming, then the Guaranteed and Maximum bit rate
parameters should also be provided.
Numeric parameter that indicates the maximum number
of kbits/s delivered to EDGE (up-link traffic) at a SAP.
As an example a bit rate of 32kbit/s would be specified
as '32' (e.g. AT+CGEQREQ=...,32, ...). If the
parameter is set to '0' the subscribed value will be
requested This parameter should be provided if the
Traffic class is specified as conversational or streaming.
Numeric parameter that indicates the maximum number
of kbits/s delivered by EDGE (down-link traffic) at a
SAP. As an example a bit rate of 32kbit/s would be
specified as '32' (e.g. AT+CGEQREQ=...,32, ...). If the
parameter is set to '0' the subscribed value will be
requested. This parameter should be provided if the
Traffic class is specified as conversational or streaming.
Numeric parameter that indicates the guaranteed
number of kbits/s delivered to EDGE (up-link traffic) at
a SAP (provided that there is data to deliver). As an
example a bit rate of 32kbit/s would be specified as '32'
(e.g. AT+CGEQREQ=...,32, ...). If the parameter is set
to '0' the subscribed value will be requested. This
parameter should be provided if the Traffic class is
specified as conversational or streaming.
Numeric parameter that indicates the guaranteed
number of kbits/s delivered to EDGE (down-link
traffic) at a SAP (provided that there is data to deliver).
As an example a bit rate of 32kbit/s would be specified
as '32' (e.g. AT+CGEQREQ=...,32, ...). If the
parameter is set to '0' the subscribed value will be
requested. This parameter should be provided if the
Traffic class is specified as conversational or streaming.
3-353