Cpbw, Write Phone Book Entry - Motorola G24 Guide Developer's Manual

Phone and Date Books and Clock
+CPBF: 2,"8475767800",129,"Moto Voicemail"
+CPBF: 101,"+97252999080",145,"Voice Mail"
OK
AT+CPBF="Moto"
+CPBF: 2,"8475767800",129,"Moto Voicemail"

+CPBW, Write Phone Book Entry

This command enables the user to store a new entry in the phone book, or edit/delete an existing
entry from the phone book. A particular entry in the phone book can be stored, or the next
available entry is used.
This command writes the entry in the currently active phone book, selected with the +CPBS
command
<index>, the phone number is entered into the <number> field and text associated with the
number is entered into the <text> field. If these fields are omitted, the phone book entry is
deleted. If the <index> field is omitted, but a number is entered in the <number> field, the phone
number is entered into the first available entry in the phone book. If the writing fails in a G24
error, +CME ERROR: <err> is returned.
The phone book and date book are share dynamic memory storage. If the writing fail in a G24
error in case of "full memory" error while the memory is not full by 'used' field of +CPBS
command (Refer to
checking the memory's capacity of the dynamic memory storage by +MPDPM command (Refer
to "+MPDPM, Motorola Phonebook Dynamic Percentage Memory" on page
Note:
Command
Type
Set
Test
3-76
(Refer to "+CPBS, Select Phone Book Memory", page
"+CPBS, Select Phone Book Memory" on page
The "FD" phone book supports single wild card characters (?) and prefixes of a number
in the telephone number field. In cases of fixed dialing, these entries in the "FD" phone
book define a group of permitted numbers.
Call indications related to a fixed dialing entry containing wild cards or only a prefix of
a number do not display any <alpha> identifier.
Syntax
AT+CPBW=[<index>][,
<number>
[,<type>[,<text>]]]
AT+CPBW=?
AT Commands Reference Manual
3-71). The entry is selected by
Response/Action
OK
or:
+CME ERROR: <err>
+CPBW: (list of This command queries the
allowable command field and
supported
sizes.
<index>s),[<nlength>],
(list of supported
<type>s),[<tlength>]
OK
3-71). It is recommended
3-85).
Remarks
December 31, 2007