Memw, Write Or Update Email Message - Motorola G24 Guide Developer's Manual

+MEMW, Write or Update Email Message

This AT command is used to write a new email message or update an existing one.
The message is saved in memory, and the message ID is displayed to the user.
Notes:
Command
Type
Set
The following table shows the +MEMW parameters.
<Parameter>
<aos_field>
<message_id>
<email_list/subject>
Body
Example:
New Email
AT+MEMW=0,,"joe@mail.com"
> text for body is entered here
> new line is entered <CTRL+Z>//<CTRL+Z> ends the prompt text mode
//and returns to regular AT command mode
+MEMW: 109
OK
December 31, 2007
•
To create a new email message, <message_id> field must not be provided.
•
To update an email message, <message_id> field must be provided.
•
When updating a field, old value of the updated field is deleted.
•
Total body length decreased if Auto-signature text exists.
•
New emails are saved in DRAFTS, updated emails are saved in their current
folder.
Syntax
AT+MEMW=[<aos_field>],[
<message_id>],[<email_list/s
ubject>]<CR>
> Body text is entered
<ctrl-Z/ESC>
Table 3-99: +MEMW Parameters
0 - Addresses of intended recipients of TO: field.
1 - Addresses of intended recipients of CC: field.
2 - Addresses of intended recipients of BCC: field.
3 - The subject of the current email message.
Message identifier number created automatically for each existing mail in mail
storage.
<Email_list> - formatted email address/es with max input size of 500
characters for To & Cc fields, 250 characters for Bcc filed (list of email
addresses are separated by "," or ";").
<subject> - free text with max input size of 128 characters for this field.
Body of email message, with max input size of 3000 characters.
Text entry is followed by ctrl-Z for saving the message or ESC for aborting the
composer.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
+MEMW: <message_id> The Set command writes a
message and stores it.
OK
or:
+CME ERROR: <err>
Description
Remarks
3-165