Motorola G24 Guide Developer's Manual page 83

Hide thumbs Also See for G24 Guide:

Table of Contents

December 31, 2007

Table 2-1: Core AT Commands (Cont.)

This command returns a phone to the Online Data mode and issues

a CONNECT or CONNECT <text> result code.

This command is supported for backward compatibility only, and

has no effect.

This command determines whether to output/suppress the result

This unsolicited notification indicates UART is ready.

This command reads/writes values of the S-registers, and includes

registers 1-49, 94, 96 (Audio) and 102 (Sleep mode).

This command is supported for backward compatibility only, and

has no effect.

This command determines the response format of the data adapter

and the contents of the header and trailer transmitted with the result

codes and information responses.

This command defines the data adaptor response set, and the

CONNECT result code format.

This command is supported for backward compatibility only, and

has no effect.

This command resets the default configuration.

AT Commands Reference Manual

Chapter 2: Introduction to AT Commands

Show Quick Links

Table of Contents