Motorola G24 Guide Developer's Manual page 585

+CPUC
+CPWD
+CR
+CRC
+CREG
+CRING
+CRLP
+CRSL
+CRSM
+CRTT
+CSCA
+CSCB
+CSCS
+CSDH
+CSMP
December 31, 2007
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command sets the
parameters of the Advice of
Charge-related price per unit and
currency table found in the SIM
file, EFPUCT.
This command sets a new
password for the facility lock.
This command controls whether
or not the extended format of an
outgoing call is displayed or not.
This command controls whether
to present the extended format of
the incoming call indication.
This command enables/disables
the network status registration
unsolicited result code.
This unsolicited event indicates
the type of incoming call.
This command returns the Radio
Link Protocol parameters.
This command handles the
selection of the incoming call
ringer and alert tone (SMS)
sound level on the alert speaker
of the G24.
This command provides limited
access to the Elementary Files on
the SIM.
This command plays one cycle of
a ring tone, stops the cycle in the
middle, and sets the ring tone to
be used.
This command handles the
selection of the SCA and the
TOSCA.
This command handles the
selection of cell broadcast
message types and data coding
schemes received by the G24.
This command selects the G24
character set.
This command shows the Text
Mode parameters.
This command sets the Text
Module parameters.
AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-60
Page 3-258
Page 3-61
Page 3-19
Page 3-169
Page 3-19
Page 3-168
Page 3-232
Page 3-302
Page 3-247
Page 3-101
Page 3-135
Page 3-4
Page 3-106
Page 3-104
Page
A-9