Motorola G24 Guide Developer's Manual page 586

AT Commands Alphabetical Summary
+CSMS
+CSNS
+CSSN
+CSQ
+CSVM
+CTFR1
+CUSD
+EMPC
+EPIN
+FAR
+FCL
+FCLASS
+FDD
A-10
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command handles the
selection of the SMS service
type.
This command handles the
selection of the bearer or
teleservice to be used when a
mobile terminated single
numbering scheme call is
established.
This command handles the
enabling and disabling of
supplementary service-related,
network-initiated, notifications.
This command returns the signal
strength received by the G24.
This command handles the
selection of the number to the
voice mail server.
This command terminates an
incoming call and diverts the
caller to the number previously
defined in CCFC, or to a voice
mail if one exists for the
subscriber.
This command allows control of
Unstructured Supplementary
Service Data (USSD), according
to GSM 02.90.
This command unlocks or
resets the first PLMN of the
inserted SIM.
This command is only relevant
for phones that use SIM cards. It
verifies the PIN2 indicator.
This command is supported for
backward compatibility only, and
has no effect.
This command is supported for
backward compatibility only, and
has no effect.
This command places the
terminal in particular mode of
operation (data, fax, voice).
This command is supported for
backward compatibility only, and
has no effect.
AT Commands Reference Manual
Description
Page 3-98
Page 3-36
Page 3-62
Page 3-167
Page 3-77
Page 3-39
Page 3-65
Page 3-262
Page 3-256
Page 3-422
Page 3-422
Page 3-424
Page 3-422
Page
December 31, 2007