Calm, Alert Sound Mode - Motorola G24 Guide Developer's Manual

+CALM, Alert Sound Mode

This command handles the selection of the G24's alert sound mode. The value of the command is
saved after a power cycle.
Command Type
Set
Read
Test
The following table shows the +CALM parameters.
<Parameter>
<mode>
Note:
Example
AT+CALM=?
+CALM: (0,1)
OK
AT+CALM?
+CALM: 0
OK
AT+CALM=1
OK
December 31, 2007
Syntax
+CALM=<mode>
+CALM?
+CALM=?
Table 3-161: +CALM Parameters
Alert sound mode of the G24.
0 Ring (default)
1 Silent mode (ring prevented)
Selecting the ring mode with this command retrieves the current alert volume level
setting.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
OK The Set command sets the alert sound
mode.
+CME ERROR: <err>
+CALM: <mode> The Read command displays the
current alert sound mode setting.
+CME ERROR: <err>
+CALM: (list of The Test command displays the list of
supported modes.
supported <mode>s)
+CME ERROR: <err>
Description
Remarks
3-245