Values; Range Of Values; Compound Range Of Values; Aborting Commands - Motorola G24 Guide Developer's Manual

At commands
Hide thumbs Also See for G24 Guide:
Table of Contents

Advertisement

Values

Values

Range of Values

When the action accepts a single numeric sub-parameter, or the parameter accepts only one
numeric value, the set of supported values may be presented in the information text as an ordered
list of values.
The following are some examples of value range indications:

Compound Range of Values

When the action accepts more than one sub-parameter, or the parameter accepts more than one
value, the set of supported values may be presented as a list of the parenthetically enclosed value
range strings (described above), separated by commas.
For example, the information text in response to testing an action that accepts three
sub-parameters, and supports various ranges for each of them, could appear as follows:
(0),(1-3),(0,4-6,9,11-12)

Aborting Commands

Some action commands that require time to execute may be aborted while in progress. This is
explicitly noted in the description of the command. Aborting a command is accomplished by
transmitting any character from the terminal to the G24. A single character is sufficient to abort
the command in progress. To ensure that the aborting character is recognized by the G24, it
should be sent at the same rate as the preceding command line. The G24 may ignore characters
sent at other rates. When an aborting event is recognized by the G24, it terminates the command
in progress and returns an appropriate result code to the terminal, as specified for the particular
command.
When a command is aborted, this does not mean that its operation is reversed. In the case of some
network commands, when the abort signal is detected by the G24, although the command is
aborted following G24-network negotiation, the operation might be fully completed, partially
completed or not executed at all.
2-8
Value Range
(0)
Only the value 0 is supported.
(1,2,3)
The values 1, 2, and 3 are supported.
(1-3)
The values 1 through 3 are supported.
(0,4,5,6,9,11,12)
The several listed values are supported.
(0,4-6,9,11-12)
An alternative expression of the above list.
AT Commands Reference Manual
Description
December 31, 2007

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents