Return The Value Of The Last Updated S-Register; F, Set To Factory Defined Configuration - Motorola G24 Guide Developer's Manual

?, Return the Value of the Last Updated S-register

This command displays the most recently updated value stored in an S-register.
Command Type
Read
Example
AT?
000
OK
AT?
003
OK
ATS36=5
OK
AT?
005
OK
&F, Set to Factory Defined Configuration
This command restores the factory default configuration profile. The G24 only supports one
factory default profile, 0.
Command Type
Set
Read
Test
The following table shows the &F parameters.
<Parameter>
<value>
December 31, 2007
Syntax Response/Action
AT? 000
OK
Syntax Response/Action
AT&F<value> OK
or:
+CMS ERROR: <err>
AT&F? <current profile
number>
Table 3-187: &F Parameters
0 Factory default configuration profile. This is the only value supported.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
The Read command returns the value
of the last updated S-register.
Remarks
The Test command for &F is not
defined by ITU, and therefore is not
supported by the G24. The G24 returns
an error.
Description
3-281