Motorola G24 Guide Developer's Manual page 347

The following table shows the +EMPC parameters.
<Parameter>
<pin>
<action>
<unlock>
<reset>
Example
AT+EMPC?
+EMPC:3,0
OK
The status of phone is: the subsidy lock is not active.
AT+EMPC="<correct pin>",0
+EMPC:0,2
OK
The command unlocks the phone if the password was typed correctly.
AT+EMPC="<correct pin>",1
+EMPC:0,1
OK
The command resets the phone if the password was typed correctly.
The following case shows an example of five unsuccessful attempts at entering the pin:
AT+EMPC="<wrong pin>",0
+EMPC:1,1
OK
AT+EMPC="<wrong pin>",0
+EMPC:1,1
OK
AT+EMPC="<wrong pin>",0
+EMPC:1,1
OK
AT+EMPC="<wrong pin>",0
+EMPC:1,1
OK
December 31, 2007
Table 3-174: +EMPC Parameters
Subsidy Lock pin code.
0 Unlock subsidy
1 Reset subsidy
0 Correct pin code is entered
1 Wrong pin code is entered
2 Wait
3 No meaning
0 No subsidy lock
1 Subsidy lock / Reset not allowed
2 Subsidy unlock / Reset allowed
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
3-263