Mfotaind, Send Unsolicited Fota Indications Toward The Dte - Motorola G24 Guide Developer's Manual

+ MFOTAIND, Send Unsolicited FOTA Indications Toward
the DTE
When set, the module will send all the indications mentioned in
By default, FOTA unsolicited information report is Disabled.
This command is a basic command.
In MUX mode, this AT command is allowed on DLC2 only.
Command
Type
Set
Read
Test
Unsolicited
Report
The following table shows the +MFOTIND parameters.
<Parameter>
<EN-ind>
December 31, 2007
Syntax
AT+MFOTAIND= OK
<EN-ind> or:
+CME ERROR:<err>
AT+MFOTAIND? + MFOTAIND:
< EN-ind >,
OK
AT+FOTAIND=? + FOTAIND:
(list of < EN-ind >s)
+FOTAIND +FOTAIND: <OMA
state>,
<FOTA-Indication>
Table 3-179: +MFOTAIND Parameters
0 - Disable FOTA unsolicited informational report.
1 - Enable FOTA unsolicited informational report.
The default value is 0.
Enables the Module to indicate the DTE with FOTA progress. Relevant to Non
transparent mode.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Table 3-179
Response/Action
The Set command
enables/disables Unsolicited
indications. See
Returns <EN-ind> value.
OMA state and FOTA information
reports during FOTA process.
Description
.
Remarks
Table 3-179.
3-271