Volume Control
To increase the volume, push volume lever towards the
the volume, push lever towards the
To mute, hold lever to the
for 2 seconds. To unmute, push lever to
the
or press the PTT button. The WRSM unmutes automatically
each time it is connected and disconnected. Volume returns to the
previous level.
Manual Mute Priority
You can select Manual Mute Priority by using the Accessory
Programming Software (APS) Tool. When you mute the WRSM, the
WRSM will not be automatically unmute unless you push the lever
towards the
or press the PTT button.
Volume
Toggle
Audio Indicator
Figure 2.9: Volume Control
The color of the Audio Indicator LED changes according to Table 2.3 .
. To decrease
.
Pairing Your WRSM
Procedure:
1
Ensure both the radio and WRSM are powered on.
2
Place the blue dot (secure pairing spot) on the WRSM within one
inch of the blue dot (secure pairing spot) on the radio. Refer to
Figure 2.10.
3
During pairing, the Audio Indicator LED blinks according to the
pairing status. Refer to Table 2.5 for pairing indicators.
Table 2.5: Pairing LED, Tone Indication and Voice Prompt
Audio Indication
State
LED
Not Paired
Off
Paired
LED illuminated
Successfully
Wireless Link
Connected with
LED Heartbeat Connected tone
Host
Wireless Link
Disconnected
LED illuminated
from Host
NOTE:
* You will hear Disconnected tone every 2 minutes after the
WRSM prompts "Disconnected".
Tone
Voice Prompt
Indication
"Touch blue dots
Pairing Ready
together to
tone every
connect" every
2 minutes
2 minutes
Pairing
"Connecting"
Successful tone
"Connected"
Disconnected
tone every
"Disconnected" *
2 minutes
English
9