Changing System Options - AT&T Call Management System Supervizor's Manual

Changing System Options and Programming Exceptions

Changing System Options

You may reset several system options. Initial settings are in effect for these
options until you define new values. The options are listed below (with factory
settings in parentheses):
Service Level Limit (20 seconds)
Abandoned Call Threshold (10 seconds)
Audible Alarm ('on')
Delay Message Length (10 seconds)
Business Name
To begin changing system options, do the following:
1. From the CMS Main Menu, press [F4] (Admin CMS).
The Administration Menu appears.
2. From the Administration Menu, press [F5] (Set Options).
The Set Options screen (Figure
system options.
4-2)
appears. This is the screen used to select
Changing System Options 4-3