Rename Configuration; Choose Startup - AT&T Call Management System Supervizor's Manual

Supervising CMS
The following prompt appears:
SAVE CONFIGURATION:
NAME ?
Where x is the name of the configuration and
configuration.
3. Type y to confirm your request or
4. Press [F8] (Enter Data),

Rename Configuration

From the Stored Shift Configurations screen:
1. Press [F3] (Rename Config) to name or rename a configuration.
Configuration names can be up to 10 letters, numbers, or special char-
acters. Spaces are not allowed, so you may want to use underscores
instead. Remember that if you rename a configuration "UNUSED," the
system deletes the configuration.
The following prompt appears:
RENAME CONFIGURATION :
2. Enter the configuration number (1 through 6).
3. Enter the new name (up to 10 letters, numbers, or special characters).
4. Press [F8] (Enter Data).

Choose Startup

From the Stored Shift Configurations screen:
1. Press [F4] (Choose Startup) to select a shift configuration to be invoked
automatically during the CMS startup procedure. Don't select a startup
configuration, however, if you want to choose a different configuration
each time you begin call handling.
6-50 Dynamic Reconfiguration
Replace Contents of Config # X – \
(Y/N) : _
NAME
to cancel it.
n
Config #:_ New Name:
the name of the
is