Selecting A Startup Configuration - AT&T Call Management System Supervizor's Manual

Programming CMS Shift Configurations
Enter the new name (up to 10 letters, numbers, or special characters).
3.
NOTE:
Configuration names can contain as many as 10 letters, numbers, or
special characters. Spaces are not allowed, so you may want to use
underscores instead.
4. Press [F8] (Enter Data).
The function keys change.
5. Choose another activity .from the Stored Shift Configurations screen or
press [F8] to return to the Administration Menu.

Selecting a Startup Configuration

You should select one of the six shift configurations to be invoked automati-
cally during the CMS startup procedure. However, if you want to choose a
configuration each time you begin managing calls, do not select a startup
configuration at this time.
To choose this activity:
From the Stored Shift Configurations screen, press [F4] (Choose
1.
Startup).
The prompt appears as follows:
CHOOSE STARTUP CONFIGURATION :
Config #: _
Enter the number of the configuration you want to use as the startup
2.
configuration, or enter a hyphen if you do not want a startup
configuration.
3. Press [F8] (Enter Data).
The words (startup default ) appear next to the configuration you
selected.
4.
Choose another activity from the Stored Shift Configurations screen or
press [F8] to return to the Administration Menu.
(Enter '-' for none ) \
Selecting a Startup Configuration 3-33