Using The Stored Shift Configurations Screen - AT&T Call Management System Supervizor's Manual

Supervising CMS
Using the Stored Shift
Configurations Screen
The Stored Shift Configurations screen (Figure 6-1 3), is very simi
call management and programming.
The shift configuration currently in use for call management is shown in
reverse video on the screen. If you made any changes to the configuration,
but have not yet saved them, the word
configuration number. If you have chosen a configuration to be invoked
automatically when you start call management, the words
appear next to that configuration name.
default)
Bon Voyage Travel
Printer Now Ready
F Save
F Select
2 Con fig
1 Config
Figure 6-13. Stored Shift Configurations Screen
STORED SHIFT CONFIGURATIONS
1 - DAY ( startup default)
2 - CONFIG_2
3 - UNUSED
4 - UNUSED
5 - UNUSED
6 - UNUSED
F Rename F Choose
4Startup
3 Config
appears to the left of that
(Changed)
(startup
DAY CMS R3.0
F Config F System
7 Screen 8 Status
Dynamic Reconfiguration 6 - 4 7
lar during
7:09p 03/04
F1O - Help