Related Manuals for AT&T OneVision DEFINITY G3
Summary of Contents for AT&T OneVision DEFINITY G3
- Page 1 585-229-112 Issue 1 June, 1995 Table of Contents OneVision DEFINITY G3 Fault Management Adding Proxy Agent Nodes Graphics © AT&T 1988...
- Page 2 Blank Page...
-
Page 3: Node Limitations
Adding Proxy Agent Nodes This addendum to the OneVision DEFINITY G3 documentation explains how to add a Proxy Agent as a managed node to your HP OpenView NMS. It describes: Node Limitations How to add a Proxy Agent icon to the network map How to configure a Proxy Agent object Complete the procedures in this addendum after you add a DEFINITY G3 switch to the network map. -
Page 4: Adding Proxy Agent Icons
Adding Proxy Agent Nodes Adding Proxy Agent Icons Use the following steps to add a Proxy Agent icon as a node on the HP OpenView NMS: 1. Display the appropriate network map. 2. Select Edit from the menu bar. Result: The system opens the Edit pull-down menu. 3. -
Page 5: Configuring Proxy Agent Objects
Configuring Proxy Agent Objects Configuring Proxy Agent Objects A G3 Proxy object cannot receive any data until it is configured appropriately. To create the appropriate configuration, complete the following steps. Start on the network map that displays after you finished the preceding procedure. 1. - Page 6 Adding Proxy Agent Nodes The following table is an example of the parameters completed for a Proxy Agent: Field Parameter Comments Proxy Not used Target The Proxy If your network has a name Agent name or server, use the Proxy Agent IP address name that you entered in the Label field.
Need help?
Do you have a question about the OneVision DEFINITY G3 and is the answer not in the manual?
Questions and answers