Changing Automatic Acw; Changing Force Delay - AT&T Call Management System Supervizor's Manual

Supervising CMS

Changing Force Delay

A description of the force delay option appears on page 3-20.
To change force delay, do the following:
1. From the Line Group Option screen, press [F2] (Force Delay).
The Force Delay editing keys appear with this prompt:
FORCE DELAY :
2. Type in the group Ietter for the line group you want to program.
3. Press [F8] (Enter Data).
The setting toggles automatically to
you made the change. (The factory setting is off.)
4. Repeat steps 1 through 4 to adjust the force delay for another group, or
press [F7] to return to the Configuration screen.
Choose an activity from the Configuration screen or press [F7] to return
5.
to the Stored Shift Configurations screen.
6. Choose an activity from the Stored Shift Configurations screen or press
[F8] to return to the System Menu.

Changing Automatic ACW

A description of the Automatic ACW option appears on pages 3-20 an 3-21.
To program Auto ACW, do the following:
1. From the Line Group Options screen, press [F3] (Auto ACW).
The following prompt appears near the bottom portion of the screen:
AUTOMATIC ACW: Group Letter:
2. Enter a group letter (A through D) for the group to be programmed.
Group Letter: _
on
or off, depending on the setting before
Seconds:
—
Dynamic Reconfiguration 6-41