Set The Time - AT&T Call Management System Supervizor's Manual

Using Your PC with CMS

Set the Time

To check or change the time on your PC:
1. When the CMS Main Menu appears upon starting CMS, press [F8] (Exit
to DOS).
2. When the DOS prompt appears, type
The following message appears on your screen:
(Example):
Current time is HH:MM:SS. XX
Enter new time:
where HH = hour, MM
second.
3. If the time is correct, press [
If the time is incorrect, type in the correct hour and minute (for example,
then press [
19:03
clock, so if you want to enter the time as 2:30 p.m. you must type 14:30.
MS-DOS keeps track of the seconds and hundredths of seconds for
you.
4. To return to CMS, at the prompt, type
The CMS Main Menu screen appears.
2-4 Setting the Date and Time
minute, SS = second, and XX = one hundredths of a
=
] .
<
] . MS-DOS works on the basis of a 24-hour
<
cms.
and press [
time
]
<