Displaying Address Pool Information - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual

JunosE 11.3.x IP Services Configuration Guide

Displaying Address Pool Information

show ip nat pool
88
NOTE: Because they are not NAPT translations, port numbers for GRE
translations appear as asterisks (*).
Example 2
host1# show ip nat translations verbose
Inside
Prot local
---- ----------- ---------- -----------
20.0.0.3
21.0.0.3
21.0.0.4
---
---
---
UDP ---
UDP 22.0.0.4:63
UDP 22.0.0.3:63
TCP ---
UDP 20.50.0.3:87 30.50.0.3:8 ---
See show ip nat translations.
The show ip nat pool command displays NAT address pool information. The command
output displays configuration (mask and address ranges) of all address pools, unless
you supply a specific pool name.
Use to display NAT address pool information.
Field descriptions
pool—Name of the address pool
netmask—Network prefix associated with the NAT address pool
Inside Outside
global global
30.0.0.3 ---
30.208.0.3 ---
30.208.0.4 ---
--- 50.0.0.3
--- 51.0.0.3
--- 51.0.0.4
--- 50.50.0.3:8 70.50.0.3:8 00:03:10
7
30.224.0.3: ---
4097
30.224.0.3: ---
4096
--- 50.50.0.3:8 70.50.0.3:8 00:03:10
0
108
Time
Outside since
local creation last use
----------- ---------- --------
--- 00:04:50 00:00:01
--- 00:02:12 00:00:01
--- 00:02:12 00:00:01
70.0.0.3 00:03:24
70.208.0.3 00:01:44 00:00:01
70.208.0.4 00:01:44 00:00:01
108
--- 00:02:12 00:00:01
--- 00:02:12 00:00:01
008
--- 00:03:35
Copyright © 2010, Juniper Networks, Inc.
Time
since
Never
Never
Never
Never