Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
After importing, the configuration appears at the cluster level in NSM. To view or edit the
configuration, open the cluster icon, not the individual cluster members.
Adding a Junos Cluster with Modeled Cluster Members
When adding a modeled cluster member, you need only provide a member name. The
modeled member must be activated later when the device is ready, just as for the
standalone device. At that point, you provide the remaining information necessary for
managing the device through NSM, such as the first connection one-time password, the
NSM administrator username and password, and the Device Server IP address.
To add a cluster with modeled cluster members:
In NSM, add the cluster object using the Add Cluster wizard.
1.
In the Device Manager, select Devices, click the Add icon, and select Cluster from
the list. Provide the cluster name and color of the icon. Select Junos as the OS name
and J/SRX Series as the Junos OS type. Provide the platform name and managed
OS version.
Add each cluster member.
2.
Right-click the cluster icon in the Device Manager and select New > Cluster Member,
and follow the instructions in the Add Cluster Member wizard. When prompted,
select Model Device.
Adding a modeled cluster member is similar to adding a modeled standalone Junos
device, except that you must specify a member ID, and you also have the option of
adding a second modeled cluster member within the same workflow. You can add
the second cluster members later if you prefer.
After creating the cluster and member objects, you can then model the configuration.
Configuration modeling is done at the cluster level, because the configuration must be
identical in both cluster members. Use the configuration group mechanism to configure
any member-specific data. See "Configuring Devices" on page 185 for details about
configuring clusters and configuration groups.
Activating and Updating a Modeled Junos Cluster
After modeling a cluster configuration, you must perform the following steps to activate
and update the cluster before you can manage it from NSM:
Install the cluster.
1.
Configure logon credentials for the NSM administrator on each cluster member.
2.
In NSM, activate each cluster member.
3.
In the Device Manager, expand the cluster icon and right-click the cluster member.
Select Activate Device from the list and follow the instructions in the wizard. Select
Device deployed, but IP is not reachable, when prompted.
On each cluster member, configure and activate the NSM agent and establish an
4.
SSH session with NSM.
Push the modeled configuration to the device by right-clicking any cluster member
5.
icon and selecting Update Device from the list.
Chapter 4: Adding Devices
157
Advertisement
Table of Contents
