Server Only) - Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1 Quick Start Manual

NSM3000 Quick Start
16
Use the
5. Remote Replication Timeout
range (in seconds) is 1 through 65535. The default is 1800 seconds.
Click Submit to save the options and return to the main menu or continue with the
6.
other advanced installation options.
Enabling and Configuring the Statistical Report Server (SRS) (Regional Server
Only)
(This option is not available on a central manager.) To configure statistical report server
(SRS) settings:
On the Advanced Options menu, click Menu next to SRS (see Figure 5 on page 12) to
1.
open the SRS menu (see Figure 13 on page 16).
Figure 13: SRS Menu
Use the SRS options to turn SRS on (y) or off (n). The default is off. If you turn on this
2.
feature, the server is used with the GUI server.
Use the option to enter the IP address for the server on which you have
3. SRS DB IP
installed the SRS database server.
Use the SRS DB Type option to select the database type. The values are pgsql (the
4.
default), oracle, or mssql.
Use the
SRS Database Name
5.
default value is netscreen. To enter another name, click the radio button next to the
blank text box and enter the name in the text box.
Use the
6. SRS DB Owner Name
The default value is netscreen. To enter another name, click the radio button next to
the blank text box and enter the name in the text box.
option to set up a timeout for Rsync. The valid
option to enter the name of the SRS database. The
option to enter the owner's name of the SRS database.
Copyright © 2010, Juniper Networks, Inc.