Check Your Service Provider's Offering - Alcatel Speed Touch Wireless User Manual

1.2.3

Check your Service Provider's Offering

Service offering
Default STWireless
VPI/VCI settings
3EC 17766 AAAA TCZZA Ed. 01
The SP provides at least the following information:
The Virtual Channel Identifier, that is, the VPI/VCI value of the
"
VC to use on the ADSL line
The Connection Service supported on this VC
"
Example: VPI/VCI = 0/35; Connection Service = PPPoE
Your STWireless supports multiple simultaneous VCs on the ADSL
line. If your SP exploits this capability, he will provide this
information per VC.
The VPI/VCI value of the default configured VCs are listed in
Appendix E.
In the event that the provided VPI/VCI differ with the STWireless
defaults, you can change VC settings via the STWireless web
pages.
See section 10.2 for more information.
1 Speed Touch Wireless Quick Guide
21 / 362