3D Systems FIGURE 4 MODULAR User Manual page 84

Port B - This is information about Ethernet Port B on the back of your Controller. Definitions for items A-D, above,
F
also apply here.
Cancel - Cancels the current changes to network settings
G
Apply - Applies the current changes to network settings
H
6.1.3.3 Localization
6.1.3.4 FW-SW Version
3D Systems, Inc.
Language - Use the dropdown menu to change
A
the display language. This dropdown is only active
when not editing the Time Zone.
Date/Time - This is a read-only field for date and
B
time
Time Zone - This is the time zone that is currently
C
set for the Controller
Edit - Tap this button to edit the time zone.
D
Control Module - The firmware version currently
A
on Controller. This field will also show you when
there is a firmware update available.
Printers - The firmware version currently on all
B
your printers. This field will also show you when
there is a firmware update available. However,
updates only come when there is also a firmware
update on the Controller.
Update Message - This message appears when
C
the Controller detects the availability of new
firmware.
Update Manager - Tap this button to begin the
D
firmware update manager. This will also check if
there are any updates available.
80 p/n 42-D116, Rev. K