3D Systems FIGURE 4 MODULAR User Manual page 126

2. Insert your USB drive into a USB port on the Controller
tabletop. The Controller will auto-detect the firmware file and
show the screen at the right. Tap the Go To Update Manager
button.
3. You may choose not to install this update yet. Simply tap
the X button to close the dialog window. When you are ready
to perform the installation, either unplug/re-plug the USB or
go to Settings > FW/SW Version and tap the Update Manager
button.
Update Over Network
Feature not yet supported.
Update Via 3D Sprint
Feature not yet supported.
Update Manager
1. The Update Manager will open and begin copying the
install files from the USB.
2. When the files are finished copying, tap the Install Update
button.
3D Systems, Inc. 122 p/n 42-D116, Rev. K