Download Print this page

3D Systems FIGURE 4 MODULAR User Manual page 79

Advertisement

6.1.2.1 Queue Toolbar
6.1.2.2 Active Print Jobs
Jobs in this section are those that are actively printing, completed, failed, or aborted, and have not been removed from the
machine. Once a print job completes/fails/aborts, removing the print platform from the machine will move the job to the
Completed Print Jobs section. A breakdown of the Active Print Jobs section is seen below.
Active Print Jobs Button - Tap to expand/collapse the Active Print Jobs list.
A
Module - The Printer that the job is printing on.
B
Material - The material that was sent over with the build file from 3D Sprint
C
Submitted - The date and time the job was submitted to the Controller
D
Completion - The date and time the job is estimated to complete
E
Left - The estimated time left in the print job
F
3D Systems, Inc.
Add Print Job - Tap this button to add a print job
A
via USB.
Print Job Information - When a print job is
B
selected, tap this button to see more information
about the job.
Duplicate - When a print job is selected, tap this
C
button to duplicate the job.
Move to Top - Tap this button to move the
D
pending print job to the top of the queue.
Move Up One Spot - Tap this button to move the
E
pending print job up one spot in the queue.
Move Down One Spot - Tap this button to move
F
the pending print job down one spot in the queue.
Move to Bottom - Tap this button to move the
G
pending print job to the bottom of the queue.
Abort/Delete - When an active print job is
H
selected, tap this button to abort the job. This
button becomes a "Delete" icon (in the red square
in the picture) when a pending or completed print
job is selected.
75
p/n 42-D116, Rev. K

Advertisement

loading
Need help?

Need help?

Do you have a question about the FIGURE 4 MODULAR and is the answer not in the manual?