3D Systems FIGURE 4 MODULAR User Manual page 68

Printer Name - This line identifies the Printer by the name you assigned it. The default name is in the format,
A
"Module.[last 4 digits of printer SN]."
Material Type - This line identifies the material type that is running in the Printer.
B
Print Job Name - This line identifies the name of the current, or most-recent, print job sent to the Printer. After a
C
build has been removed from a printer, and another build is not started, this text says, "No Active File."
Time Left - This line indicates approximately how much time is left in the current print job.
D
Progress Bar - This bar indicates the percent completion of the current print job.
E
Printer Status - This line indicates the current status of the Printer. Please see the section
F
Statuses for more information.
Abort Button - Tap this button to abort the current print job. Upon pressing this button, you will have to go through
G
a confirmation popup before the job is actually aborted.
6.1.1.1 Printer - Expanded View
Tap a Printer's card to expand the parameters and information available to you. There are six card sections, as seen in the
image below. If a card section is not expanded, simply tap the collapsed section to view it.
3D Systems, Inc. 64
Printer/Auxiliary Print Unit
p/n 42-D116, Rev. K