Printer Firmware Update - 3D Systems FIGURE 4 MODULAR User Manual

3. Tap the Update button on the confirmation screen.
4. Once the update has finished installing, the Controller will
need to restart. It will automatically do this; and there is not
a way to back out of it. This will not affect any of your current
builds, but will prevent the print queue from processing
additional print jobs. It will also prevent you from operating
the Controller during the update process. The whole update
time period will vary depending on the file size of the update,
and the installation time of that update.
5. When the Controller screen comes back up, you will see
a confirmation screen that asks you to now upgrade the
firmware on the Printers. Please tap the Update Manager
button and go to the section

6.11.2 Printer Firmware Update

Updating the Printer firmware cannot be done independently of upgrading the Controller firmware. New Controller firmware
must be installed before new Printer firmware can be installed. If you are currently printing, you can schedule the firmware
installation to happen after your current build is complete. Please take the steps below to update your Printer firmware.
3D Systems, Inc.
Printer Firmware Update.
123 p/n 42-D116, Rev. K