3D Systems FIGURE 4 MODULAR User Manual page 116

1. Navigate to the Queue tab. In the Active Print Jobs section,
tap the row of the print job you wish to abort.
2. Tap the
button in the top-right corner to abort the job. Confirm the
abort on the popup screen. You could also use the
button instead of the
button to perform the same task.
Tip: If your print job is still pending, there is
no need to abort and the option is grayed out.
Simply tap the job from the Pending Print Jobs
section and tap the
button to delete the job. This will move the job
to the "Aborted" section.
3. You will see the popup message at the right. Tap Dismiss to
clear the message.
4. Please see the section After Aborting
Printer Touch Screen
To abort a job from the Printer touch screen:
1. On the Printer's touch screen, press and hold the
button to abort the print job.
CAUTION: Be sure you want to abort the job
before engaging this button, as it will abort the
job without additional warning.
3D Systems, Inc.
for more information.
112 p/n 42-D116, Rev. K