3D Systems FIGURE 4 MODULAR User Manual page 181

# ERROR TEXT ON
PRINTER DISPLAY
28 Resin Level Sensor
Error Level Sensor
calibration is outside
valid range. Please
Contact 3D Systems
Support.
29 Resin Level Sensor
Error Hardware error
with Resin Level
Sensor. Please Contact
3D Systems Support.
30
Expired Material
Inserted Cartridge
expired on [date]. We
recommend using a
different cartridge.
Button: >
3D Systems, Inc.
ERROR TEXT ON
CONTROLLER
Resin Level Sensor Error
Level Sensor calibration
on [printer name] is
outside valid range.
Please Contact 3D
Systems Support.
Resin Level Sensor Error
Hardware error with the
Resin Level Sensor on
[printer name]. Please
Contact 3D Systems
Support.
Expired Material in
[printer name]. The
material cartridge has
expired on [date].
We recommend using
another cartridge.
Button: Dismiss
177
STACK LIGHT HOW TO CLEAR
STATE
Flashing red Contact 3D Systems Service.
Flashing Red Contact 3D Systems Service.
Flashing red Install a new, or unexpired, material
cartridge with resin inside.
p/n 42-D116, Rev. K