Settings Screen - 3D Systems FIGURE 4 MODULAR User Manual

Submitted - The date/time the print job was submitted to the Printer
D
Completed - The date/time the print job completed
E
Time - The amount of time the print job took to complete
F
Progress - Shows the overall progress that the print job reached
G
Status - The status of the completed print job. This could be Completed, Aborted, or Failed.
H

6.1.3 Settings Screen

A
B
C
D
E
3D Systems, Inc.
System Controls - The controls in this card allow you to restart
or shut down the Controller. Please see the section
Controls for more information.
Network Settings - The controls in this card allow you to
change some basic network settings for the Controller. Please
see the section Network Settings
Localization - The controls in this card allow you to change
the date and time settings for the Controller. Please see the
section Localization for more information.
FW/SW Version - Informational field that tells you the
firmware/software version that is currently on your Controller
and Printers. You can begin the FW/SW update process
from here. Please see the section
information.
Diagnostics/Logs - Allows you to export diagnostics logs to aid
3D Systems in troubleshooting your Modular system. Please
see the section Diagnostics Logs
77
System
for more information.
FW/SW Version for more
for more information.
p/n 42-D116, Rev. K