Add New Material In 3D Sprint - 3D Systems FIGURE 4 MODULAR User Manual

5. During the firmware update, you will not be able to use the Printer; and it will not be able to accept print jobs. You can see
the update's installation progress displayed on the Update Manager screen, Status tab, and on the local display of the Printer.
If the update has not started, ensure that the printer's local display is on the "Ready to Print" screen.
6. Once the update has completed, tap the
button on the Printer GUI to mark the unit as ready.

6.12 Add New Material in 3D Sprint

When new materials launch for the printer, there will be a 3D Sprint database update that will need to be downloaded and
applied to add this material, and its build style, to 3D Sprint. This section describes how to download and install the database
update.
1. Ensure that you have upgraded to the latest version of
3D Sprint. Sprint should automatically check for the latest
Sprint version, unless you have turned this feature off. To
turn it back on, click the
icon, click the switch that says, "Check for updates on
launch," and restart 3D Sprint. At startup, if an update is
available, Sprint will start a wizard to walk you through the
software-update download and installation.
2. Go to this page to download the latest material-database
update file. This page will always host the latest update as a
zip file. Unzip the file to the location of your choice.
3D Systems, Inc.
Sample image only. File name will be different depending on
update being applied.
125 p/n 42-D116, Rev. K