Enabling A User Profile; Displaying And Maintaining User Profile - 3Com 4500G Family Configuration Manual

When a user profile is active, you cannot configure or remove the QoS policy applied to it.
The QoS policies applied in user profile view support only the remark, car, and filter actions.
Do not apply an empty QoS policy in user profile view, because even if you can do that, the user
profile cannot be activated.

Enabling a User Profile

A created user profile takes effect only after being enabled.
Follow these steps to enable a user profile:
To do...
Enter system view
Enable a user profile
Only an enabled user profile can be used by a user. You cannot modify or remove the configuration
items in a user profile until the user profile is disabled.
Disabling a user profile logs out the users using the user profile.

Displaying and Maintaining User Profile

Display information about all the created user profiles
Use the command...
system-view
user-profile profile-name
enable
To do...
1-3
Remarks
—
Required
A user profile is disabled by default.
Use the command...
display user-profile