Configuring Ipv6 Pim-Sm; Ipv6 Pim-Sm Configuration Task List - 3Com S7906E Configuration Manual

Configuring IPv6 PIM-SM

IPv6 PIM-SM Configuration Task List

Complete these tasks to configure IPv6 PIM-SM:
Enabling IPv6 PIM-SM
Configuring an RP
Configuring a BSR
Configuring IPv6 Multicast Source Registration
Configuring SPT Switchover
Configuring IPv6 PIM Common Features
Configuration Prerequisites
Before configuring IPv6 PIM-SM, complete the following task:
Configure any IPv6 unicast routing protocol so that all devices in the domain are interoperable at
the network layer.
Before configuring IPv6 PIM-SM, prepare the following data:
The IP address of a static RP and an ACL rule defining the range of IPv6 multicast groups to be
served by the static RP
C-RP priority and an ACL rule defining the range of IPv6 multicast groups to be served by each
C-RP
A legal C-RP address range and an ACL rule defining the range of IPv6 multicast groups to be
served
C-RP-Adv interval
C-RP timeout
C-BSR priority
Hash mask length
An IPv6 ACL rule defining a legal BSR address range
BS period
BS timeout
An IPv6 ACL rule for register message filtering
Register suppression time
Register probe time
The IPv6 ACL rule, and sequencing rule for disabling an SPT switchover
Task
Configuring a static RP
Configuring a C-RP
Enabling embedded RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring an IPv6 PIM domain border
Configuring C-BSR parameters globally
Configuring C-BSR timers
1-17
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional