Sharp MX-4100N Service Manual page 66

(Example)
Previous value before
adjustment
A: 100
B: 112
C: 95
D: 98
E: 102
F: 96
NOTE: If either of front or rear adjustment value is changed, the
other adjustment print pattern position may be varied. Be
careful of that.
10-C Image registration adjustment (Sub
scanning direction) (Manual adjustment)
NOTE: If item "AR_AUTO" in SIM44-1 is 0 (Allows) and process
control is executed, the image registration adjustment is
executed automatically and updates the result in each
case.
In case of retaining the manual adjustment result, 1 (inhib-
its) must be set to item "AR_AUTO" of SIM44-1.
A: Rough adjustment pattern B: Fine adjustment pattern C: Adjustment range
New adjustment value
A: 86 (=100-14)
B: 88 (=112-24)
C: 97 (=95+2)
D: 120 (=98+22)
E: 116 (=102+14)
F: 140 (=96+44)
C
MX-5001N ADJUSTMENTS 5 – 24
1) Enter SIM50-21 mode.
10-key
EXECUTE
2) Select the paper feed tray with A4 (11" x 8.5") or A3 (11" x 17")
paper in it by changing the value of set item H.
3) Press [EXECUTE] key.
The sub scanning direction image registration adjustment pat-
tern is printed.
A
B
EXECUTE
or end of print