Sharp MX-4100N Service Manual page 434

(1) DSPF paper feed clutch
1) Remove the front cabinet.
2) Remove the rear cabinet.
3) Remove the paper feed cover.
4) Remove the paper feed unit.
5) Remove the pawl, and remove the paper feed PG upper cover.
6) Disconnect the connector. Remove the screw, and remove the
paper feed PG upper supporting plate.
2
7) Remove the E-ring and the bearing. Lift the paper feed roller
shaft diagonally, and remove the DSPF paper feed clutch.
* When assembling, check to insure that the clutch rotation stop-
per is engaged with the plate.
2
D. Transport section
a
b
c
(1) DSPF No.1 resist roller clutch
1)
2)
1
* When assembling, check to insure that the clutch rotation stop-
per is engaged with the plate.
(2) DSPF transport roller clutch
3
1)
2)
* When assembling, check to insure that the clutch rotation stop-
per is engaged with the plate.
1
MX-5001N DSPF SECTION C – 8
b
c
Parts
DSPF No.1 resist roller clutch
DSPF transport roller clutch
DSPF No.2 resist roller clutch
Remove the rear cabinet.
Disconnect the connector. Remove the clutch stopper (a), and
remove the DSPF No.1 resist roller clutch (b).
b
a
2
1
Remove the rear cabinet.
Disconnect the connector, and remove the snap band.
Remove the resin E-ring, and remove the DSPF transport
roller clutch.
3
1
a
2