Sharp MX-4100N Service Manual page 445

7) Stop at the stamping position/Stamping operation (First sheet)
8) Paper exit start (First sheet)/Preliminary paper feed start (Sec-
ond sheet)
9) Paper exit completion (First sheet)
10) Stop at the stamping position/Stamping operation (Second
sheet)
11) Paper exit start (Second sheet)
12) Paper exit completion (Second sheet)
13) Pickup roller rising
C. RSPF mixed document select switch
This machine is provided with the random paper feed function
which allows feeding documents of different sizes.
The random paper feed can be used only for single surface docu-
ment of the following combinations.
Destination
AB series
Inch width
To enable the mixed document mode, set the mixed document
select switch to ON. To disable le, turn it OFF.
MX-5001N RSPF SECTION D – 7
Combinations for random paper feed
A3 and B4
B4 and A4R
A4 and B5
B5 and A5
8.5" and 11" width
OFF
ON