Sharp MX-4100N Service Manual page 281

64-7
Purpose Operation test/check
Function (Purpose) Used to print the adjustment pattern of the
test print .(Self print). (The adjustment pat-
tern of SIM46-21 is printed.)
Section
Operation/Procedure
1) Set the print conditions.
Select an item to be print condition with [↑] [↓] keys.
Set the print conditions with 10 key.
2) Press [EXECUTE] key.
The adjustment pattern of SIM46-21 is printed.
Item/Display Content
A COPIES Number of print
B PROC YES 0 The half tone
ADJ process control
correction
value is
reflected.
NO 1 The half tone
process control
correction
value is not
reflected.
65
65-1
Purpose Adjustment
Function (Purpose) Used to adjust the touch panel (LCD dis-
play section) detection coordinates.
Section Operation panel section
Operation/Procedure
Touch the center of the cross mark at the four corners of the
screen.
When the adjustment is completed normally, the screen shifts to
the simulation sub number entry menu.
In case of an error, the screen returns to the adjustment menu.
Setting Default
Writing
range value
1 - 999 1 No
0 - 1 1 Yes
MX-5001N SIMULATION 6 – 134
65-2
Purpose Operation check/test
Function (Purpose) Used to display the touch panel (LCD dis-
play section) detection coordinates.
Section
Operation/Procedure
Touch the touch panel.
The coordinates X (horizontal direction) and Y (vertical direction) of
the touched position is displayed in real time.
65-5
Purpose Operation check/test
Function (Purpose) Used to check the operation panel key
input.
Section
Operation/Procedure
Press the keys sequentially according to the guidance displayed on
the screen.
If the key entry is effective, the guidance for pressing the next key
is displayed. When all the key entries are completed, "COMPLETE"
is displayed.
<Check target key>
8.5 Inch LCD model
JOB STATUS
SYSTEM SETTINGS
HOME
1
2
3
4
5
6
7
8
9
AUDIT CLEAR
0
PROGRAM
CLEAR
STOP
CLEAR ALL/RESET
START (COLOR)
START (MONO)
8.1 Inch LCD model
DOCUMENT FILING
IMAGE SEND
COPY
JOB STATUS
FUNCTION
SYSTEM SETTINGS
1
2
3
4
5
6
7
8
9
AUDIT CLEAR
0
PROGRAM
CLEAR
STOP
CLEAR ALL/RESET
START (COLOR)
START (MONO)