Sharp MX-4100N Service Manual page 147
Digital full color multifunctional system
Hide thumbs
Also See for MX-4100N:
- Operation manual (903 pages) ,
- Quick start manual (120 pages) ,
- Software setup manual (44 pages)
Table of Contents
Advertisement
5)
After completion of printing, the DSPF adjustment start screen
is displayed.
6)
Load the SPF adjustment pattern on the DSPF.
7)
Press [EXECUTE] key, and scanning of the SPF adjustment
pattern selected in step 2) is started.
8)
When [ALL] is selected, load the SPF adjustment pattern on
the DSPF again, and perform the adjustment of the back sur-
face in the similar procedures.
9)
The adjustment result screen is displayed.
The value of this time is displayed, and the value of the last
time is displayed in the parenthesis ( ).
* When [REPRINT] button is pressed, the display returns to
the cassette select screen to allow self-print of the SPF
adjustment pattern (front, back) again.
* When [RESCAN] button is pressed, the SPF adjustment
pattern (front, back) is scanned again.
* When [RETRY] button is pressed, the adjustment value is
not saved in EEPROM and RAM and shifted to the top menu
screen.
* When [DATA] button is pressed, the data used in execution
of the adjustment are displayed.
10) When [OK] button is pressed, the adjustment value is saved in
EEPROM and RAM and the display is shifted to the end
screen.
MX-5001N ADJUSTMENTS 5 – 105
Advertisement
Table of Contents
