Sharp MX-4100N Service Manual page 183

(*2) Item B: COLOR MODE set value (OFF: Displayed/ON: Not dis-
played)
Mode
Set value
Single
0 OFF
1 OFF
2 ON
3 ON
4 OFF
5 OFF
6 ON
7 ON
(*3)
Target
paper
1K Postcard, The operation is stopped
saddle envelope when 30 sheets of a same
stitch kind are discharged
finisher continuously. When, however,
different kinds of sheets are
mixed and discharged and
less than 30 sheets of a kind
are continuously discharged,
the operation is performed
similarly to that of setting
value "1".
Label The operation is stopped
sheet, tab when 100 sheets of a same
sheet, OHP kind are discharged
continuously. When, however,
different kinds of sheets are
mixed and discharged and
less than 100 sheets of a kind
are continuously discharged,
the operation is performed
similarly to that of setting
value "1".
Inner Postcard, The operation is stopped
finisher envelope when 10 sheets of a same
kind are discharged
continuously. When, however,
different kinds of sheets are
mixed and discharged and
less than 10 sheets of a kind
are continuously discharged,
the operation is performed
similarly to that of setting
value "1".
Label The operation is stopped
sheet, tab when 100 sheets of a same
sheet, OHP kind are discharged
continuously. When, however,
different kinds of sheets are
mixed and discharged and
less than 100 sheets of a kind
are continuously discharged,
the operation is performed
similarly to that of setting
value "1".
2-Color/Single
2-color Counter
OFF OFF
ON OFF
OFF OFF
ON OFF
OFF ON
ON ON
OFF ON
ON ON
Target paper setting
0 1
The operation
is stopped
when the paper
exit tray is full
or when 500
sheets (94mm
thick) are
discharged.
If it is set to "1,"
the operation is
stopped when
the paper exit
tray is full or
when 250
sheets
(35.5mm thick)
are discharged.
MX-5001N SIMULATION 6 – 36
26-52
Purpose Setting
Function (Purpose) Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Count up
1 No count up
2) Press [OK] key.
The set value in step 1) is saved.
Destination
U.S.A 0 (Counted)
CANADA 0 (Counted)
INCH 0 (Counted)
JAPAN 1 (Not counted)
AB_B 0 (Counted)
EUROPE 0 (Counted)
U.K. 0 (Counted)
AUS. 1 (Not counted)
AB_A 0 (Counted)
CHINA 0 (Counted)
26-53
Purpose Setting
Function (Purpose) User auto color calibration (color balance
adjustment) Inhibit/Allow setting
(copy mode)
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Inhibit
1 Allow (Default)
2) Press [OK] key.
The set value in step 1) is saved.
Default