Sharp MX-4100N Service Manual page 241

: Oct. 24 2008
1
48-5
Purpose Adjustment
Function (Purpose) Used to correction the scan image magnifi-
cation ratio (in the sub scanning direction).
Section Scanner section
Operation/Procedure
1) Select a target adjustment item with [↑] [↓] key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value is saved.
When the image magnification ratio in the sub scanning direction is
adjusted with SIM48-1, and a different magnification ratio is speci-
fied, and the image magnification ratio is not satisfactory, perform
this adjustment.
When there is an error in the image magnification ratio in reduction,
change the adjustment value in the high speed mode. When there
is an error in the image magnification ratio in enlargement, change
the adjustment value in the low speed mode.
Item/Display
A MR (HI) Scanner motor (High speed)
B MR(MID) Scanner motor
(Reference speed)
C MR(LO) Scanner motor (Low speed)
D SPF(HI) Document feed (SPF) motor
(High speed)
E SPF(MID) Document feed (SPF) motor
(Reference speed)
48-6
Purpose Adjustment
Function (Purpose) Used to adjust the rotation speed of each
motor.
Section
Setting Default
Content
range value
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
MX-5001N SIMULATION 6 – 94
Operation/Procedure
1) Select an adjustment target mode with [COLOR] [MONO]
[HEAVY] keys on the touch panel.
2) Select a target adjustment item with [↑] [↓] key on the touch
panel.
3) Enter the set value with 10-key.
4) Press [OK] key.
The set value is saved.
When the adjustment value is increased, the speed is increased,
and vice versa. A change of 1 in the adjustment value corresponds
to a change of about 0.1% in the speed.
Mode
Item/Display Content
Select
COLOR A RRM Resist
1
motor
correction
value
B BTM Belt motor
correction
value
C DM_K Drum K
motor
correction
value
D DM_CL Drum CL
motor
correction
value
E DVM_K Developing
K motor
correction
value
F FSM Fusing
motor
correction
value
G DVM_CL Developing
CL motor
correction
value
H PFM Paper
transport
motor
correction
value
I POM Paper exit
motor
correction
value
MONO A RRM Resist
motor
correction
value
B BTM Belt motor
correction
value
C DM_K Drum K
motor
correction
value
D DVM_K Developing
K motor
correction
value
E FSM Fusing
motor
correction
value
Default value
Setting
41-sheet 50-sheet
range
machine machine
1 - 99 50 49
1 - 99 45 45
1 - 99 43 43
1 - 99 43 43
1 - 99 50 50
1 - 99 20 14
1 - 99 50 50
1 - 99 50 50
1 - 99 45 45
1 - 99 50 49
1 - 99 45 45
1 - 99 43 43
1 - 99 50 50
1 - 99 20 14