Sharp MX-4100N Service Manual page 192
Digital full color multifunctional system
Hide thumbs
Also See for MX-4100N:
- Operation manual (903 pages) ,
- Quick start manual (120 pages) ,
- Software setup manual (44 pages)
Table of Contents
Advertisement
33-2
Purpose
Data clear
Function (Purpose) Used to delete the ID (IDM) information of
Felica card.
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The ID (IDM) information of Felica card in the HDD is deleted.
40
40-2
Purpose
Adjustment/Setup
Function (Purpose) Manual paper feed tray paper width sensor
adjustment.
Section
Paper feed
Operation/Procedure
1)
Open the manual paper feed guide to the max. width (MAX).
2)
Press [EXECUTE] key.
The max. width (MAX) detection level is recognized.
3)
Open the manual paper feed guide to P1 width (A4).
4)
Press [EXECUTE] key.
The P1 width (A4) detection level is recognized.
5)
Open the manual paper feed guide to P2 width (A4R).
6)
Press [EXECUTE] key.
The P2 width (A4R) detection level is recognized.
7)
Open the manual paper feed guide to the min. width (MIN).
8)
Press [EXECUTE] key.
The min. width (MIN) detection level is recognized.
When the above operation is not performed normally, "ERROR" is
displayed. When completed normally, "COMPLETE" is displayed.
MAX POSITION
Manual feed max. width
P1(A4)POSITION
Manual feed P1 position width (A4)
P2(A4R)POSITION
Manual feed P2 position width (A4R)
MIN POSITION
Manual feed min. width
40-7
Purpose
Function (Purpose) Used to set the adjustment value of the
Section
Operation/Procedure
1)
Select a target item to be adjusted with [↑] [↓] buttons.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
Item/Display
A
MAX POSITION
B
P1(A4) POSITION
C
P2(A4R) POSITION
D
MIN POSITION
41
41-1
Purpose
Function (Purpose) Used to check the operations of the docu-
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
OCSW
PD1 - 7
MX-5001N SIMULATION 6 – 45
Adjustment/Setup
manual paper feed tray paper width sensor.
Paper feed
Content
Manual feed max. width
Manual feed P1 position width
(A4)
Manual feed P2 position width
(A4R)
Manual feed min. width
Operation test/check
ment size sensor and the control circuit.
Document cover status
Open: Normal display
Close: Highlighted
Document detection
No document: Normal display
sensor status
Document present: Highlighted
Default
value
241
231
140
19
Advertisement
Table of Contents
