Sharp MX-4100N Service Manual page 216

Item/Display Content
ENV VO Environment Control voltage
correction correction value for
control the high humidity
voltage environment
Item/Display Content
AUTO DEVE Area in the Humidity area
AREA auto display in the
development automatic developer
adjustment adjustment
AREA Current area Current humidity
area display
44-21
Purpose Adjustment/Setup
Function (Purpose) Used to set the half tone process control
target.
Section Process
Operation/Procedure
Press [EXECUTE] key.
The half tone process control target is set and the operation data
are displayed.
Display
COMPLETE
ERROR COLOR SENSOR
ADJUSTMENT
ERROR BLACK SENSOR
ADJUSTMENT
[YMCK]
OTHER
Setting Default
range value
-127 - 0
127
Setting Default
range value
1 - 14 8
Content
Normal complete
Color image density sensor
sensitivity adjustment error
Black image density sensor
sensitivity adjustment error
High density process control error
[YMCK]
Other errors
MX-5001N SIMULATION 6 – 69
44-22
Purpose Operation data display
Function (Purpose) Used to display the toner patch density
level in the half tone process control opera-
tion.
Section Process
Operation/Procedure
1) Select the display mode with [1ST STEP],[2ND STEP] key.
The toner patch density level made in the half tone process
control operation is displayed.
Item/Display
ID_n Patch data display (n=1-16)
BASE1 Belt substrate data (START)
BASE5 Belt substrate data (LAST)
44-24
Purpose Operation data display
Function (Purpose) Used to display the correction target and
the correction level in the half tone process
control operation.
Section Process
Operation/Procedure
1) Select the display category with [NEXT] key.
2) Select a target adjustment color with [K] [C] [M] [Y] key.
Category Item/Display
Coefficient [EX-LOW]
[LOW]
[CONNECT]
[MID]
[HIGH]
[CONNECT POINT]
Reference [SENSOR_TARGET]
value
Correction [S_VALUE]
value
Content
Content
Coefficient of the
approximation formula of
the minimum density
Coefficient of the
approximation formula of
the low density
Coefficient of the
approximation formula of
when connecting the low
density and the medium
density
Coefficient of the
approximation formula of
the medium density
Coefficient of the
approximation formula of
the high density
Each density section
connection output ratio
Half tone process control
reference value
Half tone process control
correction value