Sharp MX-4100N Service Manual page 265
Digital full color multifunctional system
Hide thumbs
Also See for MX-4100N:
- Operation manual (903 pages) ,
- Quick start manual (120 pages) ,
- Software setup manual (44 pages)
Table of Contents
Advertisement
55
55-1
Purpose
(Do not use this function unless specially
required.)
Function (Purpose) Used to set the specifications of the engine
control operations. (SOFT SW)
Section
Operation/Procedure
55-2
Purpose
(Do not use this function unless specially
required.)
Function (Purpose) Used to set the specifications of the scan-
ner control operation. (SOFT SW)
Section
Operation/Procedure
55-3
Purpose
(Do not use this function unless specially
required.)
Function (Purpose) Used to set the specifications of the control-
ler operation. (SOFT SW)
Section
Operation/Procedure
56
56-1
Purpose
Function (Purpose) Used to transport data between HDD - MFP
Section
Operation/Procedure
1)
Select a target content of data transfer.
2)
Press [EXECUTE] key and press [YES] key.
Data transfer of the item selected in procedure 1) is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
ALL → HDD
HDD → ALL
EEPROM → HDD
HDD → EEPROM
SRAM → HDD
HDD → SRAM
56-2
Purpose
Function (Purpose) Used to backup the data in the EEPROM.
Section
Operation/Procedure
1)
Insert the USB memory into the main unit.
2)
Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE To EEPROM, SRAM, HDD
<EXPORT>
From EEPROM, ESRAM, HDD To USB MEMORY
3)
Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
MX-5001N SIMULATION 6 – 118
Backup
PWB SRAM/EEPROM. (Used to repair the
PWB.)
All the memory contents are transferred to the HDD.
The HDD contents are transferred to all the
memories.
Transfer from EEPROM to HDD
Transfer from HDD to EEPROM
Data transfer from SRAM to HDD.
(Including the FAX memory)
When the FAX memory or an option memory
(memory for FAX) is installed, the contents in the
memory for FAX are also transferred to HDD.
Transfer from HDD to SRAM
(including the FAX memory)
When the FAX memory or an option memory
(memory for FAX) is installed, the contents of the
FAX memory are also transferred to HDD.
Data backup
SRAM, and HDD (including user authenti-
cation data and address data) to the USB
memory. (Corresponding to the device
cloning and the storage backup.)
Advertisement
Table of Contents
