Sharp MX-4100N Service Manual page 462

4) Remove the temperature and humidity sensor.
5) Remove the manual paper feed tray paper width detector.
(2) Manual paper feed gate solenoid
1) Remove the manual paper feed unit.
2) Remove the MF base guide supporting plate and the spring.
3) Disconnect the connector, and disengage the pawl, and
remove the manual paper feed gate solenoid.
(3) Paper pickup solenoid
1)
2)
3)
4)
5)
MX-5001N PAPER FEED SECTION F – 7
Remove the manual paper feed unit.
Remove the MF base guide supporting plate and the spring.
Remove each part, and remove the transport roller 12 (drive).
2
1
Remove each part, and remove the MF drive plate.
2
Disconnect the connector, and remove the MF front plate.
1
1
2
1