Sharp MX-4100N Service Manual page 283

67-26
Purpose Adjustment/Setup
Function (Purpose) Used to set the target color balance of the
printer mode auto color balance adjust-
ment.
Section Printer
Operation/Procedure
1) Select the target color balance with the touch panel.
Item/Display
Target DEF1 The engine color balance adjustment
value table target in the automatic color balance
select operation is slightly shifted to Magenta.
When this target is selected, the color
balance is converted into natural gray
color balance by the color table in an
actual printer mode and print is made.
DEF2 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to natural
gray color balance. When this target is
selected, the color balance is slightly
shifted to Cyan by the color table in an
actual copy mode and print is made.
DEF3 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to Cyan.
When this target is selected, the color
balance is converted into the color
balance with enhanced Cyan by the
color table in an actual copy mode and
print is made.
Default
Content
value
DEF 1
MX-5001N SIMULATION 6 – 136
67-27
Purpose Adjustment/Setup
Function (Purpose) Used to set the service target of the printer
mode auto color balance adjustment.
Section Printer
Operation/Procedure
1) Press [SETUP] key on the touch panel.
2) Place the printed color balance adjustment pattern sheet
printed in SIM 67-25 on the document table.
3) Press [EXECUTE] key.
The patch image of the adjustment pattern sheet is scanned.
4) Press [OK] key.
The service target of the printer mode auto color balance
adjustment is set according to the scanned adjustment pattern
sheet patch images.
The registered color balance and the density are displayed.
Select a target color with [C] [M] [Y] [K] key.
NOTE: This simulation is executed only when the printer color bal-
ance is manually adjusted.
B Point B target value
C Point C target value
D Point D target value
E Point E target value
F Point F target value
G Point G target value
H Point H target value
I Point I target value
J Point J target value
K Point K target value
L Point L target value
M Point M target value
N Point N target value
O Point O target value
BASE Background sampling value