4)
Disconnect the connector and remove the screw, and remove
the toner motor.
(2) Developing drive motor (K)
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the flywheel.
4)
Disconnect the connector and remove the screw, and remove
the developing drive motor (K)
(3) Developing drive motor (CL)
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the flywheel.
4)
Disconnect the connector and remove the screw, and remove
the developing drive motor (CL).
(4) Resist motor
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the flywheel.
4)
Disconnect the connector and remove the screw, and remove
the resist motor.
(5) Transfer belt motor
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the flywheel.
4)
Disconnect the connector and remove the screw, and remove
the transfer belt motor.
(6) BK drum motor
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the flywheel.
4)
Disconnect the connector and remove the screw, and remove
the BK drum motor.
MX-5001N DRIVE SECTION O – 2