Sharp MX-4100N Service Manual page 466

2. Operational descriptions
Transport paper from each paper feed section to the resist roller
with two or more transport rollers. The paper transport clutch con-
trols ON/OFF of each transport roller. The resist roller controls the
relative positions of the transported paper and transfer images.
The resist roller controls the relative positions of the transported
paper and transfer images. The resist roller is driven by the trans-
port motor. The relative positions of the paper and the transfer
images are determined by the ON timing of the transport motor.
3. Disassembly and assembly
A. Resist roller unit
1) Remove the developing unit (K).
2) Remove the drum unit (K).
3) Remove the primary transfer unit.
4) Remove the tray paper feed unit 1.
5) Remove the rear cabinet.
6) Remove the ADU connection drive.
7) Disconnect the connector and remove the screw, and remove
the resist roller unit.
MX-5001N PAPER TRANSPORT SECTION G – 2